Set up a two-way sync between Pipedrive and ActiveCampaign
Connect Pipedrive and ActiveCampaign to keep contacts in sync and give your sales team visibility into email engagement.

What the integration does
- Two-way contact sync. Keep all contacts, or a subset, in sync across both apps.
- Email engagement tracking. See email opens, clicks and unsubscribes on the contact in Pipedrive.
- Flexible field mapping. Sync default and custom fields in one or both directions, and choose which app wins if data conflicts.
- Built-in deduplication. Match contacts by email address, so existing contacts are linked instead of duplicated.
- Sync status monitoring. See what ran and what failed, with error messages that show how to fix it.
Before you start
- Pipedrive plan: Available on the Premium plan and above.
- No separate account needed: You sign in with your Pipedrive account. Your Outfunnel by Pipedrive account is created automatically when you activate the integration.
- Shared space: By default, you set up syncs in your company's shared space. Admins, and users with the relevant permission, can create connections there. A shared space can hold one ActiveCampaign account. To connect a second ActiveCampaign account, switch to your personal space.
- Fair use: A fair-use cap applies to the amount of data synced. See: How much data can I sync with Marketing sync by Outfunnel?
How to set up a 1-way or 2-way contact sync between Pipedrive and ActiveCampaign
You can sync contacts two-way or in a single direction, depending on your use case.
1. Go to Settings > Tools & apps > Marketing sync
Go to Settings > Tools & apps > Marketing sync. This opens a new window where you can set up the integration.
2. Authenticate ActiveCampaign
Select ActiveCampaign if it's not pre-selected and authenticate it as instructed on screen.
3. Select the connection type
Click Connect and choose Contact sync as the connection type.
4. Set the sync direction
Choose to sync data two-way or in a single direction.
5. Define contact sync rules
If you sync in a single direction, you see one ruleset. If you sync two-way, you see two rulesets: the first syncs contacts from Pipedrive to ActiveCampaign, and the second syncs contacts from ActiveCampaign to Pipedrive.
- Pipedrive contacts: Because you are syncing contacts, not deals, only Pipedrive People filters are available.
- ActiveCampaign contacts: You can sync all contacts, tags or segments.
Tip: ActiveCampaign only exposes segments created in a specific way through its API. To make sure your segment appears in the integration:
- Go to Contacts in ActiveCampaign.
- Click Search.
- Select Advanced search.
- Add your conditions.
- Save the search as a segment.
Once the segment is saved, go back to the integration and refresh the segments list. The segment should appear within a few moments.
If this is your first sync, we recommend syncing a limited number of test contacts first to get a feel for the sync.
6. Set up field mapping
Choose the default and/or custom fields you want to sync and in which direction. Then choose which app wins in case of conflicts.
Data conflicts
Data conflicts usually happen during the initial sync, when a mapped field has different values in the two apps. For example, if the name differs for the same contact, the value from the app you selected as the conflict winner is used. Most companies use Pipedrive as their system of record. If you're unsure or want to talk through your use case, use the in-app support chat.
Things to keep in mind
- Email is a default field that is matched automatically and cannot be changed. It is the unique identifier used to link contacts between the two apps.
- Read-only fields. Some fields, such as calculated fields, are read-only and can only be synced in one direction.
- Adding new fields. Create the field in the relevant app, then go back to the integration and click Refresh fields.
- Single and multiple option fields. Create the option values in both the source and destination app before mapping these fields.
- Subscription field. The subscription field syncs from ActiveCampaign as: List name ([status]); List name 2 ([status]). For example: Master Contact List (Subscribed); Second list (Unsubscribed).
- If you delete the contact sync rule or change the target segment, contacts that were already synced stay in ActiveCampaign as they are. This is different from a contact that stops matching an active rule (see Continuous sync below).
- Multiple email addresses on a contact. The link is made with the first email address on the contact profile. Other addresses are ignored.
- Merging contacts. Merging contacts with the same email is supported. After a merge, the contact may be unsubscribed from ActiveCampaign if the contact you merged into was not in sync, but it is resubscribed in the next sync because the email address is the same.
7. Activate the connection
Initial sync
After you activate the connection, an initial sync runs to merge your databases, and contacts start appearing on the sync status page. The initial sync usually takes a few minutes but can take up to a few hours, depending on the number of contacts.
The status page also shows contacts that failed to sync, with actionable feedback on how to fix them.
- Contacts are linked by email address. If no existing contact is found, a new one is created. If multiple contacts share the same email address, the link is made with the oldest contact and no duplicates are created.
- Initial sync actions in ActiveCampaign:
- Contacts are created in the database.
- Contacts are subscribed to the selected list. Bounced, opted-out and manually unsubscribed contacts are not resubscribed.
- Initial sync actions in Pipedrive: Contacts are created in the database.
Continuous sync
After the initial sync completes, a continuous sync checks for updates:
- New and removed contacts are checked every 2 hours.
- You can trigger an instant sync anytime by clicking Sync now.
- Contact changes. As long as a contact matches the rule, changes to its profile in the source app are synced to the destination app immediately
- When a contact stops matching the rules. Updates stop, but the contact is not deleted from the destination app. In ActiveCampaign, the contact is unsubscribed.
How to record ActiveCampaign engagement in Pipedrive
You can record engagement from ActiveCampaign single email campaigns and automations.

1. Go to Settings > Tools & apps > Marketing sync
Go to Settings > Tools & apps > Marketing sync. This opens a new window where you can set up the integration.
2. Authenticate ActiveCampaign
Select ActiveCampaign if it's not pre-selected and authenticate it as instructed on screen.
3. Select the connection type
Click Connect and choose Engagement sync as the connection type.
4. Choose the list or automation
Choose the ActiveCampaign list or automation you want to record email engagement for (opens, clicks, unsubscribes and more).
Recording send events is currently not possible due to ActiveCampaign API limitations.
5. Define how engagement is recorded
Define how email activities such as opens, clicks, bounces and unsubscribes are recorded in Pipedrive, or use the default settings.

6. Set up field mapping
When an engagement is synced for a contact that doesn't exist in Pipedrive yet, a new contact can optionally be created using the field mapping you define. In the field mapping step, select which default or custom fields to use. You can turn off creating contacts from email engagement on the same page.
Learn more in this article: Supported field types for Marketing sync by Outfunnel.
7. Activate the connection
Initial sync
After you activate the connection, choose whether to record engagement only from emails sent after activation, or also from the last 30 days. The initial sync usually takes a few minutes but can take up to a few hours, depending on the number of historical engagements.
The status page shows the number of engagements that have been synced.
Continuous sync
After the initial sync completes, a continuous sync records events instantly, as they happen.
Things to keep in mind
- Unsubscribe recording. Only unsubscribes initiated by the recipient are recorded in Pipedrive. Manual unsubscribes in ActiveCampaign are not recorded.
- First unique URL click per email per contact is recorded. For example, if a contact clicks 2 unique URLs 3 times each, two click activities are created in Pipedrive.
- Activities added to your calendar. If you use calendar sync in Pipedrive, these activities are automatically added to your Google or Outlook calendar. To turn this off, uncheck the relevant activity types in Pipedrive > Settings > Personal preferences > Calendar sync. Each user with calendar sync turned on needs to do this.
The activity types created are: Newsletter Sent, Newsletter Opened, Newsletter Clicked, Newsletter Bounce, Newsletter Unsubscribe, Contact Created, Form Submitted. - Activities in Pipedrive. A new activity type is created per event, and activities are linked to the person, organization and oldest open deal, so you can easily filter them.
- Notifications. To get email notifications when people open or click your emails, turn on email notifications in Pipedrive (see how). Each user can then turn them on under Settings > Personal > Preferences > Notifications.
Kas see artikkel oli abiks?
Jah
Ei